Шаблон:Infobox golf facility

Ҳуҷҷатгузорӣ

Usage

{{Infobox golf facility
| name                = <!-- name of the facility --> 
| image               = <!-- just name file name, no [[image:]] or size required -->
| imagesize           = <!-- include units -->
| caption             = 
| pushpin_map         = <!-- name of a location map (see Template:Location map) -->
| relief              = <!-- any non-blank value to display relief map, if available -->
| pushpin_mapsize     = <!-- width of map (e.g., 220 without the px), default is 250 -->
| pushpin_map_alt     = <!-- alternative text for map, see WP:ALT for details -->
| pushpin_map_caption = <!-- text displayed below map, overrides default caption -->
| latd  = | latm  = | lats  = | latNS  =
| longd = | longm = | longs = | longEW =
| coordinates_display = inline,title
| iso_region          = 
| location            = 
| establishment       = <!-- year -->
| type                = <!-- public/private -->
| owner               = <!-- name of organization/company -->
| operator            = <!-- name of organization/company -->
| holes               = <!-- total number of holes at club/resort -->
| tournaments         = <!-- notable tournaments held (if any) -->
| greens              = <!-- type of grass used -->
| fairways            = <!-- type of grass used -->
| website             = 
| course1             = <!-- individual course name, can leave blank if same as article title -->
| designer1           = 
| par1                =
| length1             = 
| rating1             = 
| slope1              =
| record1             = 
| module              = <!-- or 'embedded' or 'nrhp' -->
| image2              = <!-- a second image -->
| imagesize2          = 
| caption2            = 
}}

Additional courses

To add additional courses (up to 8 total) use

| course2            = <!-- if only one course: leave this entry and all below parts blank -->
| designer2          = 
| par2               = 
| length2            = 
| rating2            = 
| slope2             =
| record2            =

| course3            = 
| designer3          = 
| par3               = 
| length3            = 
| rating3            = 
| slope3             =
| record3            =

| course4            = 
| designer4          = 
| par4               = 
| length4            = 
| rating4            =
| slope4             = 
| record4            =

| course5            = 
| designer5          = 
| par5               = 
| length5            = 
| rating5            = 
| slope5             =
| record5            =

| course6            = 
| designer6          = 
| par6               = 
| length6            = 
| rating6            =
| slope6             = 
| record6            =

| course7            = 
| designer7          = 
| par7               = 
| length7            = 
| rating7            = 
| slope7             =
| record7            =

| course8            = 
| designer8          = 
| par8               = 
| length8            = 
| rating8            =
| slope8             = 
| record8            =

U.S. National Register of Historic Places

{{Infobox NRHP}} can be embedded in this template using the "nrhp" parameter as follows:

{{Infobox golf facility
| name = 
...
| nrhp = 
  {{Infobox NRHP | embed = yes
  | name =  
  ...
  }}
}}

Map and coordinates

It's usually not necessary to use the coordinates= parameter.

The latitude and longitude of the course may be specified:
- in decimal degrees, using latitude= and longitude= OR
- in degrees/minutes/seconds, using latd=, latm=, lats=, latNS=, longd=, longm=, longs=, and longEW=.
To display coordinates at the top of the page, set coordinates_display= to any non-blank value. Otherwise coordinates will appear in the infobox only.
The ISO 3166-1 alpha-2 or ISO 3166-2 region code is set using the iso_region= parameter.

One advantage of omitting the coordinates= parameter is that you can display a {{Location map}} without duplicating coordinates.

Parameters to specify coordinates in degrees, minutes, and seconds of arc:

{{Infobox golf facility
...
| latd   = <!-- ''latitude'' degrees -->
| latm   = <!-- ''latitude'' minutes -->
| lats   = <!-- ''latitude'' seconds -->
| latNS  = <!-- latitude: S=south, N=north (default) -->
| longd  = <!-- ''longitude'' degrees -->
| longm  = <!-- ''longitude'' minutes -->
| longs  = <!-- ''longitude'' seconds -->
| longEW = <!-- longitude: W=west, E=east (default) -->
...
}}

Parameters to specify coordinates in decimal degrees:

{{Infobox golf facility
...
| latitude  = <!-- ''latitude'' (decimal format; enter negative numbers for southern latitude) -->
| longitude = <!-- ''longitude'' (decimal format; enter negative numbers for western longitude) --> 
...
}}

Note: coordinates in decimal degrees are sensitive to extra whitespace in the parameters:

Incorrect: | longitude = - 123.45
Correct: | longitude = -123.45

Coordinates

For coordinates, use {{coord}} with display=inline,title. Please do not be overly precise.

Microformat

The HTML mark up produced by this template includes an hCard microformat, which makes the place-name and location parsable by computers, either acting automatically to catalogue articles across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to an address book. Within the hCard is a Geo microformat, which additionally makes the coordinates (latitude & longitude) parsable, so that they can be, say, looked up on a map, or downloaded to a GPS unit. For more information about the use of microformats on Wikipedia, please see the microformat project.

Sub-templates

If the place or venue has an "established", "founded", "opened" or similar date, use {{start date}} unless the date is before 1583 CE.

If it has a URL, use {{URL}}.

Please do not remove instances of these sub-templates.

Classes

hCard uses HTML classes including:

adr
agent
category
county-name
extended-address
fn
label
locality
nickname
note
org
region
street-address
uid
url
vcard

Geo is produced by calling {{coord}}, and uses HTML classes:

geo
latitude
longitude

Please do not rename or remove these classes nor collapse nested elements which use them.

Precision

When giving coordinates, please use an appropriate level of precision. Do not use {{coord}}'s |name= parameter.

TemplateData

This is the TemplateData documentation for this template used by VisualEditor and other tools.

Infobox golf facility

This is an infobox to describe individual golf courses.

Template parameters[Edit template data]
Параметр		Тавзеҳот	Type	Status
Name	`name`	The name of the facility Пешфарз default value	String	optional
Picture of course	`image`	A representative picture of the facility; just add the filename of a picture.	Page name	optional
Picture Size	`imagesize`	Provide the unit in the value; for instance, "98 pixels"	String	optional
Caption for picture	`caption`	no description	String	optional
Year course established	`establishment`	no description	Number	optional
Type of course	`type`	Typically only "Public" or "Private".	String	optional
Owner of course	`owner`	This is the owner of the golf course; if the owner has a wikipedia entry, markup with "[[" and "]]".	String	optional
Operator of course	`operator`	This is the operator of the golf course; if the owner has a wikipedia entry, markup with "[[" and "]]".	String	optional
Holes count	`holes`	Number of holes in the course (e.g. 18)	Number	optional
Greens	`greens`	Type of grass used	String	optional
Fairways	`fairways`	Type of grass used	String	optional
Tournaments held at course	`tournaments`	The tournaments listed should be notable, meaning they have wikipedia entries for them (markup with "[[" and "]]")	String	optional
Website	`website`	If there is a website for the course, add it here.	String	optional

The following parameters have not been added to the templatedata yet:

pushpin_map =
relief =
pushpin_mapsize =
pushpin_map_alt =
pushpin_map_caption =
latd = | latm = | lats = | latNS =
longd = | longm = | longs = | longEW =
coordinates_display = inline,title
iso_region =
location =
course1 =
designer1 =
par1 =
length1 =
rating1 =
slope1 =
record1 =
image2 =
imagesize2 =
caption2 =