Шаблон:Infobox vacuum tube
Usage
{{Infobox vacuum tube
|image =
|caption =
|classification = <!-- Mandatory -->
|service =
|height = <!-- inches -->
|diameter = <!-- inches -->
|weight = <!-- pounds -->
<!-- Cathode -->
|cathode_type = <!-- Mandatory -->
|heater_voltage =
|heater_current =
|filament_voltage =
|filament_current =
<!-- Anode -->
|max_dissipation =
|max_current = <!-- use either max_dissipation or max_current -->
|max_voltage =
<!-- Socket Connections -->
|pinout =
<!-- Class A amplifier ops -->
|class_a_amplification_factor =
|class_a_anode_voltage =
|class_a_anode_current =
|lass_a_screen_voltage =
|class_a_bias_voltage =
|class_a_anode_resistance =
<!-- Class C amplifier ops -->
<!-- Recommend the use of highest hated CCS specification -->
|class_c_power_output =
|class_c_anode_voltage =
|class_c_anode_current =
|class_c_screen_voltage =
|class_c_bias_voltage =
<!-- Class AB amplifier ops -->
<!-- Recommend the use of highest hated CCS specification -->
|class_ab_power_output =
|class_ab_anode_resistance =
|class_ab_anode_voltage =
|class_ab_anode_current =
|class_ab_screen_voltage =
|class_ab_bias_voltage =
|reference =
}}
Parameters
- image - Picture of the vacuum tube
- caption - Caption for the picture
- classification - Mandatory Field exampled include: cold cathode regulator, diode dual diode, triode, dissimilar triode, tetrode, beam tetrode, pentode etc.
- service - Common application of the tube examples include, Class A amplifier, AF modulator, RF amplifier
- height - Units expressed in inches, script includes converter to cm
- diameter - Units expressed in inches, script includes converter to cm
- weight - Units expressed in pounds, script includes converter to kg
- cathode_type - Mandatory field identifying the type of cathode. Examples include, cold cathode, indirectly heater, directly heated
- heater_voltage - Applicable to indirectly heated tubes
- heater_current
- filament_voltage - Applicable to directly heated tubes
- filament_current
- max_dissipation - The amount of power the tube may safety dissipate. Recommend the Continuous Commercial Service (CCS) specification be listed.
- max_current - Maximun anode current. Recommend the Continuous Commercial Service (CCS) specification be listed.
- max_voltage - Maximum CCS anode dissipation
- pinout - Picture of the tube socket pinout
- typical application - Options are presented for Class A, Class AB, and for class C. Recommend the largest CCS specification be listed.
- reference - List the source of the specification
Units
Note that all units are given in inches and pounds. The script includes a converters to automatically convert to cm and kg.
Example
| Infobox vacuum tube | ||
|---|---|---|
 RCA 12AX7 | ||
| Classification: | Dual Triode | |
| Service: | Class-A amplifier | |
| Height: | 2.2 in (56 мм) | |
| Diameter: | 0.8 in (20 мм) | |
| Cathode | ||
| Cathode type: | Indirectly heated | |
| Heater voltage: | Series / Parallel 12.6 / 6.3 | |
| Heater current: | Series / Parallel 150 / 300 mA | |
| Anode | ||
| Max dissipation Watts: | 1.2 per section | |
| Max voltage: | 330 | |
| Max current: | 3.6mA | |
| Socket connections | ||
| Акс:EIA-9A.png | ||
| Typical class-A amplifier operation | ||
| Amplification factor: | 100 | |
| Anode voltage: | 100 | |
| Anode current: | 0.5 mA | |
| Bias voltage: | -1 | |
| Anode resistance: | 80000 | |
| Reference | ||
| 1) Essential Characteristics, General Electric, 1973 | ||
{{Infobox vacuum tube
|image = [[File:RCA12ax7.jpg|45x110px]]
|caption = RCA 12AX7
|classification = Dual Triode <!-- Mandatory -->
|service = [[Class A amplifier]]
|height = 2.2 <!-- inches -->
|diameter = 0.8 <!-- inches -->
|weight = <!-- pounds -->
<!-- Cathode -->
|cathode_type = Indirectly heated <!-- Mandatory -->
|heater_voltage = Series / Parallel <br /> 12.6 / 6.3
|heater_current = Series / Parallel <br /> 150 / 300 mA
|filament_voltage =
|filament_current =
<!-- Anode -->
<!-- use either max_dissipation or max_current -->
|max_dissipation = 1.2 per section
|max_current = 3.6mA
|max_voltage = 330
<!-- Socket Connections -->
|pinout = [[File:EIA-9A.png|183x78px]]
<!-- Class A amplifier ops -->
|class_a_amplification_factor = 100
|class_a_anode_voltage = 100
|class_a_anode_current = 0.5 mA
|lass_a_screen_voltage =
|class_a_bias_voltage = -1
|class_a_anode_resistance = 80000
<!-- Class C amplifier ops -->
<!-- Recommend the use of highest hated CCS specification -->
|class_c_power_output =
|class_c_anode_voltage =
|class_c_anode_current =
|class_c_screen_voltage =
|class_c_bias_voltage =
<!-- Class AB amplifier ops -->
<!-- Recommend the use of highest hated CCS specification -->
|class_ab_power_output =
|class_ab_anode_resistance =
|class_ab_anode_voltage =
|class_ab_anode_current =
|class_ab_screen_voltage =
|class_ab_bias_voltage =
|reference = 1) Essential Characteristics, General Electric, 1973
}}