Шаблон:Infobox vacuum tube/doc

Usage

{{Infobox vacuum tube
|image   = 
|caption = 
|classification =                  <!-- Mandatory -->
|service =  

|height =                          <!-- inches -->
|diameter =                        <!-- inches -->
|weight =                          <!-- pounds -->

<!-- Cathode -->
|cathode_type =                    <!-- Mandatory -->
|heater_voltage = 
|heater_current = 
|filament_voltage = 
|filament_current = 

<!-- Anode -->
|max_dissipation =
|max_current =                     <!-- use either max_dissipation or max_current -->
|max_voltage = 

<!-- Socket Connections -->
|pinout =       

<!-- Class A amplifier ops -->
|class_a_amplification_factor =
|class_a_anode_voltage = 
|class_a_anode_current = 
|lass_a_screen_voltage = 
|class_a_bias_voltage = 
|class_a_anode_resistance = 

<!-- Class C amplifier ops -->
<!-- Recommend the use of highest hated CCS specification -->
|class_c_power_output = 
|class_c_anode_voltage = 
|class_c_anode_current = 
|class_c_screen_voltage = 
|class_c_bias_voltage = 

<!-- Class AB amplifier ops -->
<!-- Recommend the use of highest hated CCS specification -->
|class_ab_power_output = 
|class_ab_anode_resistance = 
|class_ab_anode_voltage = 
|class_ab_anode_current = 
|class_ab_screen_voltage = 
|class_ab_bias_voltage = 

|reference = 
}}

Parameters

• image - Picture of the vacuum tube
• caption - Caption for the picture
• classification - Mandatory Field exampled include: cold cathode regulator, diode dual diode, triode, dissimilar triode, tetrode, beam tetrode, pentode etc.
• service - Common application of the tube examples include, Class A amplifier, AF modulator, RF amplifier

• height - Units expressed in inches, script includes converter to cm
• diameter - Units expressed in inches, script includes converter to cm
• weight - Units expressed in pounds, script includes converter to kg

• cathode_type - Mandatory field identifying the type of cathode. Examples include, cold cathode, indirectly heater, directly heated
• heater_voltage - Applicable to indirectly heated tubes
• heater_current
• filament_voltage - Applicable to directly heated tubes
• filament_current

• max_dissipation - The amount of power the tube may safety dissipate. Recommend the Continuous Commercial Service (CCS) specification be listed.
• max_current - Maximun anode current. Recommend the Continuous Commercial Service (CCS) specification be listed.
• max_voltage - Maximum CCS anode dissipation
• pinout - Picture of the tube socket pinout

• typical application - Options are presented for Class A, Class AB, and for class C. Recommend the largest CCS specification be listed.

• reference - List the source of the specification

Units

Note that all units are given in inches and pounds. The script includes a converters to automatically convert to cm and kg.

Example

Infobox vacuum tube/doc
RCA 12AX7
Classification:	Dual Triode
Service:	Class-A amplifier
Height:	2.2 in (56 мм)
Diameter:	0.8 in (20 мм)
Cathode
Cathode type:	Indirectly heated
Heater voltage:	Series / Parallel 12.6 / 6.3
Heater current:	Series / Parallel 150 / 300 mA
Anode
Max dissipation Watts:	1.2 per section
Max voltage:	330
Max current:	3.6mA
Socket connections
Акс:EIA-9A.png
Typical class-A amplifier operation
Amplification factor:	100
Anode voltage:	100
Anode current:	0.5 mA
Bias voltage:	-1
Anode resistance:	80000
Reference
1) Essential Characteristics, General Electric, 1973

{{Infobox vacuum tube
|image   = [[File:RCA12ax7.jpg|45x110px]]
|caption = RCA 12AX7 
|classification   = Dual Triode                   <!-- Mandatory -->
|service = [[Class A amplifier]] 

|height = 2.2       <!-- inches -->
|diameter = 0.8     <!-- inches -->
|weight =           <!-- pounds -->

<!-- Cathode -->
|cathode_type = Indirectly heated                 <!-- Mandatory -->
|heater_voltage = Series / Parallel <br /> 12.6 / 6.3
|heater_current = Series / Parallel <br /> 150 / 300 mA
|filament_voltage = 
|filament_current = 

<!-- Anode -->
<!-- use either max_dissipation or max_current -->
|max_dissipation = 1.2 per section
|max_current = 3.6mA
|max_voltage = 330

<!-- Socket Connections -->
|pinout = [[File:EIA-9A.png|183x78px]]      

<!-- Class A amplifier ops -->
|class_a_amplification_factor = 100
|class_a_anode_voltage = 100
|class_a_anode_current = 0.5 mA
|lass_a_screen_voltage = 
|class_a_bias_voltage = -1
|class_a_anode_resistance = 80000

<!-- Class C amplifier ops -->
<!-- Recommend the use of highest hated CCS specification -->
|class_c_power_output = 
|class_c_anode_voltage = 
|class_c_anode_current = 
|class_c_screen_voltage = 
|class_c_bias_voltage = 

<!-- Class AB amplifier ops -->
<!-- Recommend the use of highest hated CCS specification -->
|class_ab_power_output = 
|class_ab_anode_resistance = 
|class_ab_anode_voltage = 
|class_ab_anode_current = 
|class_ab_screen_voltage = 
|class_ab_bias_voltage = 

|reference = 1) Essential Characteristics, General Electric, 1973 
}}