Шаблон:Infobox dam
 |
Этот шаблон реализован на основе Lua с использованием модуля Module:Check for unknown parameters. |
Usage
Use the following infobox for all types of hydroelectric power stations involving dams. For all types of pumped-storage, wave, and tidal power stations, please use {{Infobox power station}}.
{{Infobox dam
| name =
| name_official =
| image =
| image_size =
| image_caption =
| image_alt =
| location_map =
| location_map_size =
| location_map_caption =
| location_map_alt =
| lat_d =
| lat_m =
| lat_s =
| lat_NS =
| long_d =
| long_m =
| long_s =
| long_EW =
| coordinates_type = type:landmark
| coordinates_display = inline,title
| country =
| location =
| purpose =
| status =
| construction_began =
| opening =
| demolished =
| cost =
| owner =
| operator =
| dam_type =
| dam_crosses =
| dam_height =
| dam_height_foundation=
| dam_height_thalweg =
| dam_length =
| dam_elevation_crest =
| dam_width_crest =
| dam_width_base =
| dam_volume =
| spillway_count =
| spillway_type =
| spillway_capacity =
| res_name =
| res_capacity_total =
| res_capacity_active =
| res_capacity_inactive=
| res_catchment =
| res_surface =
| res_max_length =
| res_max_width =
| res_max_depth =
| res_elevation =
| res_tidal_range =
| plant_name =
| plant_lat_d =
| plant_lat_m =
| plant_lat_s =
| plant_lat_NS =
| plant_long_d =
| plant_long_m =
| plant_long_s =
| plant_long_EW =
| plant_operator =
| plant_commission =
| plant_decommission =
| plant_type =
| plant_hydraulic_head =
| plant_turbines =
| plant_capacity =
| plant_capacity_factor=
| plant_annual_gen =
| website =
| extra =
}}
Parameter names and descriptions
| Parameter name | Description |
|---|---|
| name | Name of dam. |
| name_official | Official name, if different from name. Preferably in native language. |
| image | Image filename, without File: parameter. Animated (.gif) and media files (.ogv) are also allowed. |
| image_size | Value to overrides the default 250px. |
| image_caption | Caption beneath image. |
| image_alt | Alternative text for image. |
| location_map | Name of a location map file. The coordinates must be specified as well (see below). |
| location_map_size | Value to overrides the default 250px. |
| location_map_caption | Caption beneath location map. |
| location_map_alt | Alternative text for location map. |
| lat_d | Latitude degrees. |
| lat_m | Latitude minutes. Omit or leave blank if lat_d is in decimal format. |
| lat_s | Latitude seconds. Omit or leave blank if lat_d is in decimal format. Remember to avoid being overly precise. |
| lat_NS | Northern or Southern latitude (enter N or S). Omit or leave blank if lat_d is in decimal format.
|
| long_d | Longitude degrees. |
| long_m | Longitude minutes. Omit or leave blank if long_d is in decimal format. |
| long_s | Longitude seconds. Omit or leave blank if long_d is in decimal format. Remember to avoid being overly precise. |
| long_EW | Longitude East or West (enter E or W). Omit or leave blank if long_d is in decimal format.
|
| coordinates_type | Optional parameter to add additional coordinate functions. See here for more details. |
| coordinates_display | Display the coordinates inline or title, or both as inline,title. |
| country | Country where the facility is located. Do not use flag icons. |
| location | General area where located. Avoid being overly-detailed. |
| purpose | Purpose of the dam(s). Common reasons are power, irrigation, flood control, navigation. If there are several purposes, consider using: Multi-purpose. Field codes: F=Flood control, I=Irrigation,, |
| status | Current status of the project. Enter any one of the following auto-expanding fields: D=Decommissioned, O=Operational, P=Proposed, UC=Under construction.
|
| construction_began | Date construction began, consider using {{Start date}}. |
| opening | Date, or future date, of inauguration. Consider using {{Start date}}. |
| demolished | Date of demolition (i.e removal or destruction of dam). Consider using {{End date}}. |
| cost | Total cost of development. |
| owner | Owner(s) of the dam. Consider limiting to the top two, and include ownership percentage if possible. Example: |
| operator | Operator(s) of the dam. Only use this parameter if it is different from the owner(s) of the dam. |
| dam_type | Type of dam. Enter any one of the following auto-expanding fields:
|
| dam_crosses | Body of river or stream below dam |
| dam_height | Height of dam. Depreciated parameter; use only if dam_height_foundation or dam_height_thalweg is not known.
|
| dam_height_foundation | Height over foundation bed, with metric conversions. |
| dam_height_thalweg | Height over thalweg (riverbed), with metric conversions. |
| dam_length | Length of dam crown, with metric conversions. |
| dam_elevation_crest | Height of the dam's crest above sea level, with metric conversions. |
| dam_width_crest | Width at crest of dam, with metric conversions. |
| dam_width_base | Width at base of dam, with metric conversions. |
| dam_volume | Volume of material in the dam structure. |
| spillway_count | Number of spillways. |
| spillway_type | Type of spillway. |
| spillway_capacity | Capacity of spillway. |
| res_name | Name of upstream body of water, if different than "dam_crosses". |
| res_capacity_total | Capacity of reservoir, i.e. megalitres. |
| res_capacity_active | The active, live or useful capacity (storage) of the reservoir. |
| res_capacity_inactive | The inactive or dead capacity (storage) of the reservoir. |
| res_catchment | Area of catchment for reservoir. |
| res_surface | Surface area (top water level) of reservoir. |
| res_max_length | Length of the reservoir at normal levels, with metric conversions. |
| res_max_width | Maximum width of the reservoir at normal levels, perpendicular to length. With metric conversions. |
| res_max_depth | Maximum water depth of reservoir. |
| res_elevation | The reservoir's height above sea level at normal levels, ith metric conversions. |
| res_tidal_range | Tidal range, if applicable. |
| plant_name | Name of plant, if applicable. |
| plant_operator | Operator(s) of the hydroelectric power plant. |
| plant_lat_d | Latitude degrees. |
| plant_lat_m | Latitude minutes. Omit or leave blank if lat_d is in decimal format. |
| plant_lat_s | Latitude seconds. Omit or leave blank if lat_d is in decimal format. Remember to avoid being overly precise. |
| plant_lat_NS | Northern or Southern latitude (enter N or S). Omit or leave blank if lat_d is in decimal format.
|
| plant_long_d | Longitude degrees. |
| plant_long_m | Longitude minutes. Omit or leave blank if long_d is in decimal format. |
| plant_long_s | Longitude seconds. Omit or leave blank if long_d is in decimal format. Remember to avoid being overly precise. |
| plant_long_EW | Longitude East or West (enter E or W). Omit or leave blank if long_d is in decimal format.
|
| plant_commission | Power plant commissioning date. May be different than dam opening date. |
| plant_decommission | Power plant decommissioning date. May be different than dam closing date. |
| plant_type | Type of hydroelectric power station. Enter any one of the following auto-expanding fields:
|
| plant_hydraulic_head | Hydraulic head at power station. |
| plant_turbines | Number of turbines, with respective rated capacity. |
| plant_capacity | Installed generation capacity, measured in megawatts (MW). |
| plant_capacity_factor | Capacity factor of the power station, in percentage. |
| plant_annual_gen | Average annual power generation of the previous year. Measured in gigawatt-hours (GWh) |
| website | Raw wikitext for entering website(s). Use [brackets] where appropriate |
| extras | Free form, spans both columns. Use sparingly. |
Coordinates
The coordinates can be specified using one of three different methods
- lat_d, lat_m, lat_s, lat_NS, long_d, long_m, long_s, long_EW – For DMS style coordinates which can be used specify the pushpin in a {{Location map}}.
- lat_d and long_d – for decimal style coordinates which can be used to specify the pushpin in a {{Location map}}.
- coordinates – with a {{coord}} template which cannot be used with the
{{Location map}}.
See Wikipedia:WikiProject Geographical coordinates#Parameters for more details about setting the coordinates_type.
Microformat
The HTML mark up produced by this template includes an hCard microformat, which makes the place-name and location parsable by computers, either acting automatically to catalogue articles across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to an address book. Within the hCard is a Geo microformat, which additionally makes the coordinates (latitude & longitude) parsable, so that they can be, say, looked up on a map, or downloaded to a GPS unit. For more information about the use of microformats on Wikipedia, please see the microformat project.
Sub-templates
If the place or venue has an "established", "founded", "opened" or similar date, use {{start date}} unless the date is before 1583 CE.
If it has a URL, use {{URL}}.
Please do not remove instances of these sub-templates.
Classes
hCard uses HTML classes including:
- adr
- agent
- category
- county-name
- extended-address
- fn
- label
- locality
- nickname
- note
- org
- region
- street-address
- uid
- url
- vcard
Geo is produced by calling {{coord}}, and uses HTML classes:
- geo
- latitude
- longitude
Please do not rename or remove these classes nor collapse nested elements which use them.
Precision
When giving coordinates, please use an appropriate level of precision. Do not use {{coord}}'s |name= parameter.
See also
- Hidden tracking/maintenance categories
- Гурӯҳ:Pages using infobox dam with unknown parameters (via Module:Check for unknown parameters)
- Гурӯҳ:Pages using infobox dam with deprecated parameters
| Buildings | |
|---|---|
| Structures | |
1 including statues. | |
