Шаблон:Infobox bridge/doc

Usage

Copy and paste the template below:

{{Infobox bridge
| name                = 
| native_name         = 
| native_name_lang    = 
| image               = 
| image_upright       = 
| alt                 = 
| caption             = 
| lat                 = 
| long                = 
| coordinates_display = inline,title
| coordinates_region  = 
| os_grid_reference   = 
| carries             = 
| crosses             = 
| locale              = 
| official_name       = 
| other_name          = 
| named_for           = 
| owner               = 
| maint               = 
| heritage            = 
| id                  = 
| id_type             = 
| website             = 
| preceded            = 
| followed            = 
| design              = 
| material            = 
| material1           = 
| material2           = 
| length              = 
| width               = 
| height              = 
| depth               = 
| traversable         = 
| towpath             = 
| mainspan            = 
| number_spans        = 
| piers_in_water      = 
| load                = 
| clearance_above     = 
| clearance_below     = 
| life                = 
| architect           = 
| designer            = 
| contracted_designer = 
| winner              = 
| engineering         = 
| builder             = 
| fabricator          = 
| begin               = 
| complete            = 
| cost                = 
| open                = 
| inaugurated         = 
| rebuilt             = 
| collapsed           = 
| closed              = 
| replaces            = 
| traffic             = 
| toll                = 
| map_type            = 
| map_relief          = 
| map_dot_label       = 
| map_image           = 
| map_size            = 
| map_alt             = 
| map_caption         = 
}}

Parameters

name: Name of bridge
native_name: Name of the bridge in the local language, if different
native_name_lang: ISO code for the local language (e.g. "fr" for French). If more than one, enter the native names using {{Lang}} instead.
image: Filename of image of the bridge
alt: Alt text for bridge image (see WP:ALT)
caption: Text for caption beneath image
lat: Latitude
long: Longitude
coordinates_display: Either "inline" or "inline,title"
coordinates_region: ISO 3166 code
os_grid_reference: OS grid reference
carries: Type of vehicles bridge carries
crosses: Body of water or geographic feature that is being crossed
locale: General area where located (e.g. San Francisco, Indiana-Kentucky State Line)
official_name: Official name
other_name: Also known as name
named_for: namesake
owner: Persons or body that owns the bridge
maint: Maintaining entity (e.g. California Department of Transportation)
heritage: Heritage status (e.g. UK listed building)
id: ID number, if available
id_type: Label for the ID field. The default, if this parameter is not specified, is ID number (for the United States National Bridge Inventory)
website: URL to the bridge's website; enclose within {{URL}}
preceded: Name of bridge upstream
followed: Name of bridge downstream
design: Type of bridge (cantilever, truss, suspension)
material: Construction material (concrete, steel, iron, stone, brick, wood)
material1: Construction material for trough
material2: Construction material for piers
length: Length of bridge, w/ conversions
width: Width of bridge, w/ conversions
height: Height of bridge, w/ conversions
depth: Depth of aqueduct channel, w/ conversions
traversable: Can standard craft (for that navigation) pass on the aqueduct? Yes/No
towpath: Side of towpath (None, N, S, E, W, NE, NW, SE, SW, Both)
mainspan: Length of main span, w/ conversions
number_spans: Number of spans or arches
piers_in_water: Number of piers standing in a river or other water in normal conditions
load: Load limit of the bridge, w/ conversions
clearance_above: Clearance on top of the bridge, if proper
clearance_below: Clearance beneath the bridge
life: Design life of the bridge in years
architect: Those responsible for the conceptual design of the bridge - to be used when engineering/construction design was done by another party
designer: Bridge designer/architect (e.g. Isambard Kingdom Brunel)
contracted_designer: The lead designer at the contract/post competition phase
winner: The winner/s of the design competition phase
engineering: The person or organization that did the engineering/construction design, where that differs from 'designer' above
builder: Construction company or bridge builder
fabricator: Steel fabricator
begin: Construction begin
complete: Construction end
cost: Total project cost
open: Opening date, use {{Start date}}
inaugurated: the date the bridge is ceremonially opened
rebuilt: Date of major rebuild
collapsed: If collapsed, then date of collapse, don't use closed - closure is assumed
closed: Closing date
replaces: The bridge or ferry services that this bridge made redundant
traffic: Average Daily Traffic value
toll: Price of the toll (if a toll bridge)
map_type: The name of a locator map; see Template:Location map#Available maps for a complete listing f options. This parameter is mutually exclusive with |map_image=.
map_relief: Whether to display a relief map with |map_type=; defaults to yes.
map_image: Filename of map image of bridge
map_alt: Alt text for map image (see WP:ALT)
map_caption: Caption for the locator or image map
extra: Spare field for modules, e.g. {{Infobox designation list}}

Map and coordinates

It's usually not necessary to use the coordinates= parameter.

The latitude and longitude of the bridge may be specified:
- in decimal degrees, using lat= and long= OR
- in degrees/minutes/seconds, using latd=, latm=, lats=, latNS=, longd=, longm=, longs=, and longEW=.
To suppress the display coordinates at the top of the page, set coordinates_display=inline.
The ISO 3166-1 alpha-2 or ISO 3166-2 region code can set using the coordinates_region= parameter.

One advantage of omitting the coordinates= parameter is that you can display a {{Location map}} without duplicating coordinates.

{{Infobox bridge
...
| latd   = <!-- ''latitude'' degrees -->
| latm   = <!-- ''latitude'' minutes -->
| lats   = <!-- ''latitude'' seconds -->
| latNS  = <!-- latitude: S=south, N=north (default) -->
| longd  = <!-- ''longitude'' degrees -->
| longm  = <!-- ''longitude'' minutes -->
| longs  = <!-- ''longitude'' seconds -->
| longEW = <!-- longitude: W=west, E=east (default) -->
| coordinates_display = <!-- non-blank to display coordinates at the top of the page. -->
| coordinates_region  = <!-- coordinates region code. -->
| map_type            = <!-- Location name used for Template:Location map -->
| map_relief          = yes<!-- Use the relief map, if it exists -->
| map_alt             = <!-- Alternative text for map image, see WP:ALT for details -->
| map_caption         = <!-- Text to be displayed below map; for no caption enter "map_caption="; if the parameter is omitted then the caption will be "Marker text (location map name)" -->
...
}}

Parameters to specify coordinates in degrees, minutes, and seconds of arc:

{{Infobox bridge
...
| latd   = <!-- ''latitude'' degrees -->
| latm   = <!-- ''latitude'' minutes -->
| lats   = <!-- ''latitude'' seconds -->
| latNS  = <!-- latitude: S=south, N=north (default) -->
| longd  = <!-- ''longitude'' degrees -->
| longm  = <!-- ''longitude'' minutes -->
| longs  = <!-- ''longitude'' seconds -->
| longEW = <!-- longitude: W=west, E=east (default) -->
...
}}

Parameters to specify coordinates in decimal degrees:

{{Infobox bridge
...
| lat  = <!-- ''latitude'' (decimal format; enter negative numbers for southern latitude) -->
| long = <!-- ''longitude'' (decimal format; enter negative numbers for western longitude) --> 
...
}}

Note: coordinates in decimal degrees are sensitive to extra whitespace in the parameters:

Incorrect: | long = - 123.45
Correct: | long = -123.45

Example

{{Infobox bridge
| name        = Sydney Harbour Bridge
| image       = Sydney Harbour Bridge from Circular Quay.jpg
| carries     = Trains, Motor vehicles, pedestrians and bicycles
| crosses     = [[Port Jackson]]
| locale      = [[Sydney]], [[New South Wales]], Australia
| design      = [[Through arch bridge]]
| length      = {{Convert|1149|m|ft|0|abbr=on}}
| width       = {{Convert|49|m|ft|0|abbr=on}}
| height      = {{Convert|134|m|ft|0|abbr=on}}
| mainspan    = {{Convert|503|m|ft|0|abbr=on}}
| below       = {{Convert|49|m|ft|0|abbr=on}} at mid-span
| begin       = 28 July 1923
| complete    = 19 January 1932
| open        = {{Start-date|19 March 1932}}
| map_type    = Australia New South Wales
| map_relief  = yes
| latd = 33 | latm = 51 | lats = 08 | latNS = S
| longd= 151| longm= 12 | longs= 38 | longEW= E
| coordinates_region = AU-NSW_type:landmark
| coordinates_display = inline
}}

Microformat

The HTML mark up produced by this template includes an hCard microformat, which makes the place-name and location parsable by computers, either acting automatically to catalogue articles across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to an address book. Within the hCard is a Geo microformat, which additionally makes the coordinates (latitude & longitude) parsable, so that they can be, say, looked up on a map, or downloaded to a GPS unit. For more information about the use of microformats on Wikipedia, please see the microformat project.

Sub-templates

If the place or venue has an "established", "founded", "opened" or similar date, use {{start date}} unless the date is before 1583 CE.

If it has a URL, use {{URL}}.

Please do not remove instances of these sub-templates.

Classes

hCard uses HTML classes including:

adr
agent
category
county-name
extended-address
fn
label
locality
nickname
note
org
region
street-address
uid
url
vcard

Geo is produced by calling {{coord}}, and uses HTML classes:

geo
latitude
longitude

Please do not rename or remove these classes nor collapse nested elements which use them.

Precision

When giving coordinates, please use an appropriate level of precision. Do not use {{coord}}'s |name= parameter. A typical 4-lane bridge (25m wide) requires 0.1 second or 0.0001° of precision.

гурӯҳи «Buildings and structures infobox templates»
Infobox building
Buildings	airport brewery casino convention center desalination plant factory hospital hut library lighthouse mill museum observatory oil refinery power station prison religious building church monastery restaurant shopping mall station venue windmill
Structures	aqueduct artwork¹ bridge type dam future infrastructure project military installation monument military memorial pier pipeline power transmission line pyramid roller coaster dual room swimming pool telescope space-based tunnel
¹ including statues.