Шаблон:Infobox power station/doc
Этот шаблон реализован на основе Lua с использованием модуля Module:Check for unknown parameters. |
Usage вироиш
Use the following infobox for all types of power stations. For hydroelectric power stations involving dams (except tidal facilities), please use {{Infobox dam}}. Hold down CTRL to copy separate sections of the template code (Windows):
{{Infobox power station | name = | name_official = | image = | image_size = | image_caption = | image_alt = | location_map = | location_map_size = | location_map_caption = | location_map_alt = | lat_d = | lat_m = | lat_s = | lat_NS = | long_d = | long_m = | long_s = | long_EW = | coordinates_type = type:landmark | coordinates_display = inline,title | country = | location = | status = | construction_began = | commissioned = | decommissioned = | cost = | owner = | operator = <!------------------------- GEOTHERMAL POWER STATIONS --> | geo_type = | geo_temp_requirement = | geo_well_count = | geo_well_depth = | geo_water_output = | geo_cogeneration = <!------------------------- NUCLEAR POWER STATIONS --> | np_reactor_type = | np_reactor_supplier = | np_fuel_type = | np_fuel_supplier = | np_cogeneration = | np_cooling_source = | np_cooling_towers = <!------------------------- PUMPED-STORAGE POWER STATIONS --> | psps_upper_res = | psps_upper_res_capacity= | psps_penstocks = | psps_lower_res = | psps_lower_res_capacity= | psps_hydraulic_head = | psps_generators = | psps_pumpgenerators = | psps_pumps = <!------------------------- SOLAR FARMS --> | solar_type = | solar_cpv_concentration= | solar_csp_technology = | solar_csp_heliostats = | solar_cpvt = | solar_site_area = <!------------------------- THERMAL POWER STATIONS --> | th_fuel_primary = | th_fuel_secondary = | th_fuel_tertiary = | th_technology = | th_feed_mine = | th_cogeneration = | th_combined_cycle = | th_cooling_source = <!------------------------- TIDAL POWER STATIONS --> | tide_technology = | tide_tsg_type = | tide_barrage_height = | tide_barrage_length = | tide_barrage_width = | tide_crosses = | tide_channel_width = | tide_channel_speed = | tide_dtp_length_perp = | tide_dtp_length_para = | tide_range = <!------------------------- WAVE FACILITIES --> | wave_technology = | wave_site_area = | wave_generator_depth = | wave_shore_distance = <!------------------------- WIND FARMS --> | wind_farm_type = | wind_site_elevation = | wind_site_usage = | wind_site_area = | wind_offshore_depth = | wind_offshore_distance = | wind_hub_height = | wind_rotor_diameter = | wind_rated_speed = <!------------------------- GENERAL --> | ps_units_operational = | ps_units_manu_model = | ps_units_uc = | ps_units_planned = | ps_units_cancelled = | ps_units_decommissioned= | thermal_capacity = | ps_electrical_capacity = | ps_electrical_cap_fac = | ps_storage_hours = | ps_annual_generation = | website = | extra = }}
Parameters вироиш
Parameter | Description |
---|---|
Lead section | |
name | Name of power station |
name_official | Official name, if different from name. Preferably in native language. |
image | Image filename, without File: parameter. |
image_size | Avoid using: Overrides the default 250px |
image_caption | Caption beneath image |
image_alt | Alternative text for image. |
location_map | Name of a location map file. The coordinates must be specified as well (see below). |
location_map_size | Avoid using: Overrides the default 250px |
location_map_caption | Caption beneath the location map |
location_map_alt | Alternative text for location map. |
lat_d | Latitude degrees. |
lat_m | Latitude minutes. Omit or leave blank if lat_d is in decimal format. |
lat_s | Latitude seconds. Omit or leave blank if lat_d is in decimal format. Remember to avoid being overly precise. |
lat_NS | Northern or Southern latitude (enter N or S ). Omit or leave blank if lat_d is in decimal format.
|
long_d | Longitude degrees. |
long_m | Longitude minutes. Omit or leave blank if long_d is in decimal format. |
long_s | Longitude seconds. Omit or leave blank if long_d is in decimal format. Remember to avoid being overly precise. |
long_EW | Longitude East or West (enter E or W ). Omit or leave blank if long_d is in decimal format.
|
coordinates_type | Optional parameter to add additional coordinate functions. See here for more details. |
coordinates_display | Display the coordinates inline or title, or both as inline,title. |
country | Country where the facility is located. Do not use flag icons, as this places an unnecessary emphasis on nationality; see MOS:FLAG for a detailed rationale. |
location | General area where located. Avoid being overly-detailed. |
status | State of the project. Enter any one of the following auto-expanding fields:
|
construction_began | Date construction of the first unit began, consider using {{Start date}}. |
commissioned | Date commissioned, or to be commissioned, of the first unit. Consider using {{Start date}}. |
decommissioned | Date decommissioned, or to be decommissioned, of the last unit. Consider using {{End date}}. |
cost | Total cost of development |
owner | Owner(s) of the power station. Consider limiting to the top two, and include ownership percentage. Example: |
operator | Plant operator(s). If different from owner. |
Geothermal power stations | |
geo_type | The type of geothermal power station. Enter any one of the following auto-expanding fields:
|
geo_temp_requirement | Minimum temperature requirement of geothermal source. Consider using: {{Convert|XX|C|F|0|abbr=on}}
|
geo_well_count | Number of geothermal wells. |
geo_well_depth | Depth of the deepest well. |
geo_water_output | Hot water production in litres. |
geo_cogeneration | Is the power station a cogeneration type? Add Yes or No .
|
Nuclear power stations | |
np_reactor_type | The type(s) of reactors currently in use, and its corresponding number of reactors. For multiple reactors types, you may use the <br/> function. For power stations using a single type of reactor, enter any one of the following auto-expanding fields:
|
np_reactor_supplier | Reactor supplier(s) |
np_fuel_type | Type of nuclear fuel. |
np_fuel_supplier | Supplier of nuclear fuel. |
np_cogeneration | Is the power station a cogeneration type? Add Yes or No .
|
np_cooling_towers | Number of cooling towers. |
Pumped-storage hydroelectric power stations | |
psps_upper_res | Name of upper reservoir. |
psps_upper_res_capacity | Water storage capacity of upper reservoir. |
psps_penstocks | Number of penstocks between the reservoirs. |
psps_lower_res | Name of lower reservoir. |
psps_lower_res_capacity | Water capacity of lower reservoir. |
psps_hydraulic_head | Hydraulic head from upper reservoir. |
psps_generators | Number of generation units of the pumped-storage power station. |
psps_pumpgenerators | Number of units used for both generating and pumping. |
psps_pumps | Number of pumping units to the upper reservoir. |
Solar farms | |
solar_type | The type of solar technology in use. Enter any one of the following auto-expanding fields:
|
solar_cpv_concentration | Concentration of CPV plant: Low , Medium , or High . See also: Types of CPV.
|
solar_csp_technology | The CSP technology in use. Enter any one of the following auto-expanding fields:
|
solar_csp_heliostats | Number of heliostats. |
solar_cpvt | Is the power station a CPVT type? Add Yes or No .
|
solar_site_area | Land area used for entire facility. Consider using: {{Convert|XX|km2|mi2|0|abbr=on}}
|
Thermal power stations | |
th_fuel_primary | Primary fuel source |
th_fuel_secondary | Secondary fuel source (optional) |
th_fuel_tertiary | Tertiary fuel source (optional) |
th_technology | |
th_feed_mine | |
th_cogeneration | Is the power station a cogeneration type? Add Yes or No .
|
th_combined_cycle | Is the power station a combined cycle type? Add Yes or No .
|
th_cooling_source | If the power station uses cooling water, add the source of the water. For other cooling technologies, add the name of technology, e.g. "air-cooled". |
Tidal power stations | |
tide_technology | The tidal technology in use. Enter any one of the following auto-expanding fields. For tidal barrage technology, please use infobox dam. |
tide_tsg_type | Type of tidal stream generator. |
tide_barrage_height | Height of tidal barrage. |
tide_barrage_length | Length of tidal barrage. |
tide_barrage_width | Width of tidal barrage. |
tide_crosses | Channel of water across which the barrage is build, or in which the tidal generators are located. |
tide_channel_width | Width of above mentioned channel. |
tide_channel_speed | Speed of water flow in the above mentioned channel. Consider using: {{Convert|XX|m/s|ft/s|1|abbr=on}}
|
tide_dtp_length_perp | Perpendicular length of the dynamic tidal power structure. |
tide_dtp_length_para | Parallel length of the dynamic tidal power structure. |
tide_range | Tidal range created by the dynamic tidal power structure. |
Wave farms | |
wave_technology | The wave technology in use (capture method). Capture methods are buoy (point absorber), surface-following attenuator, terminator, oriented perpendicular to the direction of wave propagation, oscillating water column, underwater attenuator. |
wave_site_area | Surface area used for entire facility. Consider using: {{Convert|XX|km2|mi2|0|abbr=on}}
|
wave_generator_depth | Average water depth at the converter locations. Consider using: {{Convert|XX|m|ft|0|abbr=on}}
|
wave_shore_distance | Minimum distance from shore of wave farms. Consider using: {{Convert|XX|m|ft|0|abbr=on}}
|
Wind farms | |
wind_farm_type | Type of wind farm (Onshore, Nearshore, Offshore). See also Types of wind farms. |
wind_site_elevation | Highest ground altitude (don't add hub height) over which a turbine is constructed. Consider using: {{Convert|XX|m|ft|0|abbr=on}}
|
wind_site_usage | Ground usage of Onshore wind farms (e.g. Farm land, desert, etc). |
wind_site_area | Area used for entire facility. Consider using: {{Convert|XX|km2|mi2|0|abbr=on}}
|
wind_offshore_depth | Average water depth of Offshore wind farms. Consider using: {{Convert|XX|m|ft|0|abbr=on}}
|
wind_offshore_distance | Minimum distance from shore of Offshore wind farms. Consider using: {{Convert|XX|m|ft|0|abbr=on}}
|
wind_hub_height | Height of the wind turbine towers from base to hub. Consider using: {{Convert|XX|m|ft|0|abbr=on}} If multiple types of turbines are in use, enter the maximum value. |
wind_rotor_diameter | Diameter of wind turbine rotor. Consider using: {{Convert|XX|m|ft|0|abbr=on}} If multiple types of turbines are in use, enter the maximum value. |
wind_rated_speed | Rated wind speed of the wind turbine model. Consider using: {{Convert|XX|m/s|ft/s|1|abbr=on}} If multiple types of turbines are in use, enter the minimum value. |
End section (used by all power station types, including those not listed above) | |
ps_units_operational | Number of currently operational turbines/generating units. Not applicable for pumped-storage power stations. |
ps_units_manu_model | Shortened name(s) of manufacturers and models of currently operational turbines/generating units. |
ps_units_uc | Number of generating units under construction. |
ps_units_planned | Number of generating units currently planned/proposed for installation. |
ps_units_cancelled | Number of planned generating units cancelled. |
ps_units_decommissioned | Number of generating units decommissioned. |
thermal_capacity | Thermal capacity. |
ps_electrical_capacity | Current gross installed capacity in megawatts, or planned capacity from those under development. Add only current value for those operational, but with additional planned. |
ps_electrical_cap_fac | Capacity factor of the power station, in percentage. |
ps_storage_hours | Storage capacity of the power station, in hours. |
ps_annual_generation | Average annual gross power generation of the previous whole year. |
website | Official website. |
extra | Use this field to add an additional infobox within this infobox. Example. |
Microformat вироиш
The HTML mark up produced by this template includes an hCard microformat, which makes the place-name and location parsable by computers, either acting automatically to catalogue articles across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to an address book. Within the hCard is a Geo microformat, which additionally makes the coordinates (latitude & longitude) parsable, so that they can be, say, looked up on a map, or downloaded to a GPS unit. For more information about the use of microformats on Wikipedia, please see the microformat project.
Sub-templates вироиш
If the place or venue has an "established", "founded", "opened" or similar date, use {{start date}} unless the date is before 1583 CE.
If it has a URL, use {{URL}}.
Please do not remove instances of these sub-templates.
Classes вироиш
hCard uses HTML classes including:
- adr
- agent
- category
- county-name
- extended-address
- fn
- label
- locality
- nickname
- note
- org
- region
- street-address
- uid
- url
- vcard
Geo is produced by calling {{coord}}, and uses HTML classes:
- geo
- latitude
- longitude
Please do not rename or remove these classes nor collapse nested elements which use them.
Precision вироиш
When giving coordinates, please use an appropriate level of precision. Do not use {{coord}}'s |name=
parameter.
See also вироиш
- Hidden tracking/maintenance categories
- Category:Pages using infobox power station with unknown parameters (via Module:Check for unknown parameters)